ASTM A516 material steel plate equivalent

ASTM A516 is a specification for pressure vessel steel plate, which is commonly used in the manufacturing of boilers and pressure vessels. This specification covers carbon steel plates intended primarily for service in welded pressure vessels where improved notch toughness is important. A516 steel plate is available in four grades, namely A516 Grade 55, A516 Grade 60, A516 Grade 65, and A516 Grade 70. In this article, we explore the equivalent materials of A516 steel plate.

A516 Grade 55

A516 Grade 55 is the lowest strength grade of A516 steel plate. It is primarily meant for use in welded pressure vessels where notch toughness is important. The yield strength of A516 Grade 55 is 30 ksi, and the tensile strength is 55-75 ksi.

Equivalent Materials

The equivalent materials of A516 Grade 55 are as follows:

- EN 10028-2 P235GH
- DIN 17155 HI

A516 Grade 60

A516 Grade 60 is a high strength steel plate used in the manufacturing of boilers and pressure vessels. It has a tensile strength ranging from 415 to 550 MPa depending on the thickness and yield strength ranging from 220 to 260 MPa. It is primarily intended for use in welded pressure vessels where improved notch toughness is required.

Equivalent Materials

The equivalent materials of A516 Grade 60 are as follows:

- EN 10028-2 P265GH
- BS 1501-161-430A
- JIS G3115 SPV235

A516 Grade 65

A516 Grade 65 is a medium-carbon steel plate used in the manufacture of pressure vessels. It has a tensile strength ranging from 450 to 585 MPa depending on the thickness and yield strength ranging from 240 to 260 MPa. It is primarily intended for use in welded pressure vessels where improved notch toughness is required.

Equivalent Materials

The equivalent materials of A516 Grade 65 are as follows:

- EN 10028-2 P295GH
- DIN 17155 17 MN 4
- JIS G3115 SPV315

A516 Grade 70

A516 Grade 70 is a high strength carbon steel plate used in the manufacturing of boilers and pressure vessels. It has a tensile strength ranging from 485 to 620 MPa depending on the thickness and yield strength ranging from 260 to 350 MPa. This grade is primarily intended for use in welded pressure vessels where improved notch toughness is required.

Equivalent Materials

The equivalent materials of A516 Grade 70 are as follows:

- EN 10028-2 P355GH
- BS 1501-224-490B LT50
- JIS G3115 SPV355

ASTM A516 is a specification for pressure vessel steel plate used in the manufacture of boilers and pressure vessels. A516 steel plate is available in four grades, namely A516 Grade 55, A516 Grade 60, A516 Grade 65, and A516 Grade 70. The equivalent materials of these grades are listed above.