12Cr1MoV Low-alloy Seamless Steel Pipe

12Cr1MoV Low-alloy Seamless Steel Pipe. Check the complete grade, product form, applicable edition and ordered dimensions.

Check the full grade and suffix, product form, delivery condition, nominal dimensions and any impact or dimensional acceptance requirement.

12Cr1MoV Low-alloy Seamless Steel Pipe

12Cr1MoV steel pipe, also known as 12Cr1MoVG alloy steel pipe, 12Cr1MoV steel pipe is a low carbon alloy steel pipe, which belongs to the national standard low alloy high strength steel. 12Cr1MoV steel pipe has excellent comprehensive performance, especially at high temperatures, with excellent creep resistance, thermal stability, and oxidation resistance.

1. Chemical composition

* **Carbon (C)**: ≤0.20%

* **Silicon (Si)**: 0.30-0.60%

* **Manganese (Mn)**: 0.30-0.70%

* **Phosphorus (P)**: ≤0.045%

* **Sulfur (S)**: ≤0.045%

* **Chromium (Cr)**: 0.90-1.20%

* **Vanadium (V)**: ≤0.15%

2. Mechanical properties

Legacy technical note · verification required

* **Tensile Strength**: ≥485MPa

Legacy technical note · verification required

* **Yield strength**: ≥300MPa

* **Elongation**: ≥21%

* **Impact energy (KV)**: ≥48J (20℃) or ≥34J (-20℃)

3. Application

12Cr1MoV seamless steel pipes are widely used in high-pressure boiler pipes, heat exchanger pipes, high-pressure fertilizer equipment pipes, and oil refining equipment pipes in petroleum, chemical, power, and fertilizer industries under high-temperature and high-pressure conditions. Due to its excellent high temperature resistance and creep resistance, 12Cr1MoV steel pipe is also commonly used to manufacture key components such as superheater and reheater tubes for high temperature and high pressure boilers.

4. Manufacturing and inspection

The manufacture of 12Cr1MoV steel pipes must be carried out in strict accordance with relevant standards such as GB/T 8163 and GB/T 9711. During the manufacturing process, it is necessary to strictly control the chemical composition, mechanical properties, and heat treatment process to ensure that the quality and performance of the product meet the standards. At the same time, nondestructive testing, eddy current testing, ultrasonic testing and other inspection methods are also required to ensure the quality of products such as defects and cracks.

5. Heat treatment process

In order to ensure the excellent performance of 12Cr1MoV steel pipes, heat treatment is usually required, including processes such as normalizing, quenching, and tempering. These processes can further improve the strength, hardness and toughness of steel, while improving its welding performance and fatigue resistance.

12Cr1MoV low-alloy seamless steel pipe is a high-performance alloy steel pipe with wide application prospects and important economic value. Through strict manufacturing and inspection processes and appropriate heat treatment processes, it can ensure that this steel pipe can perform well under various high temperature and high pressure environments.

Record and evidence status

Source for the page topic: BBN Steel Sales legacy catalogue, record 1882. The exact edition and material evidence for legacy technical values are pending verification.

Send an Enquiry