Hydraulic Supports
S690Q high strength steel plates application. Start from the service conditions and design rules, then check the ordered grade, dimensions and inspection points.
Identify the Q, QL or QL1 suffix, thickness, ordered impact temperature, certificate and permitted fabrication route.
EN 10025-6:2004 Technical delivery conditions for steel plate and sheet of high yield strength structural steel products in the quenched and tempered condition. It covers steel grades of S460 series, S500 series, S550 series, S620 series, S690 series, S890 series, S960 series. EN 10025-6 high strength steel plates have a specified minimum yield strength of 460 MPa to 960 MPa after quenching and tempering.
The material could be warmth treated using quench and temper strategies. S690QL plates have larger payload capability and are energy efficient, hence can be utilized in leaner constructions. This steel is used in other purposes corresponding to heavy transportation, development business, machine building, and lifting tools. We deliver products in customizable options to satisfy customer-specified requirements.
Our products are widely demanded for their robust built and precision finishing. Our products are known to offer amazing usability in all kinds of use.
EN 10025-6 Steel Plates Specification
Thickness : 8-50 mm
Width : 1,500mm to 2,500mm
Length : 6,000mm to 12,000mm
Heat Treatment : Q+T(quenched and Tempered )
Grade : S460Q, S460QL, S460 QL 1, S500Q, S500QL, S500 QL 1, S550Q, S550QL, S550 QL 1, S620Q, S620QL, S620 QL 1,S690 Q, S690 QL, S690 QL 1, S890Q, S890QL, S890 QL 1,S960Q, S960QL, S960 QL 1
Grade Designation of S690QL
S = Structural Steel
690 = minimum yield strength (MPa)
Q = Longitudinal Charpy V-notch impacts temp. not lower than -20°C
QL = Longitudinal Charpy V-notch impacts temp. not lower than -40°C
QL1 = Longitudinal Charpy V-notch impacts temp. not lower than -60°C
Customer options:
Z Grade with improved properties perpendicular to the surface.
Equivalent Grades of EN 10025–6:2004 S690QL Steel Plate
| Grade | Standards | Country |
| S690QL EN10137-2 EN10025-6:2004 | EN | EUROPE |
| A709-100 | ASTM | USA |
| TStE690V DILLIMAX 690 NAXTRA 70 | DIN, WNr | GERMANY |
| E690T E690TFP S690T | AFNOR/ NF A36- 204 | FRANCE |
| FeE690VKT | EN | EUROPEAN (OLD) |
| 2625 WELDOX 700 | SS | SWEDON |
| E690 | ISO 4952 | INTER |
| JFE HITEN 780LE | JIS | JAPAN |
| ALFORM 700 | AUSTRIA |
Source and scope
- DIN EN 10025-6:2023-06, EN 10025-6:2019+A1:2022 · Quenched and tempered high-yield flat products, scope. Part 6 concerns flat products of high-yield structural steels in the quenched-and-tempered condition. Specify the Q, QL or QL1 grade, ordered thickness and required impact tests.
Apply the cited scope to the matching designation and form. Confirm any remaining technical values with the applicable edition or material certificate.
