ASTM A302 Grade B Pressure Vessel Steel Plate Material Certificate Checks
Pricing: Request an Order-Specific Quote
Reference: A302 Grade B pressure vessel steel. Check grade designation, product form and ordering requirements.
If the standard size steel materials can not meet your demands, We aslo supply A302 Grade B pressure vessel steel processing service. you can find one-stop solution for various customized steel processing requirements: Large vessels, structural parts, semi-products, components, manufacturing supporting ...
Processing: Specify drawing requirements with your enquiry.
A302 Grade B pressure vessel steel Description
A302 Grade B pressure vessel steel. Check the complete grade, product form, applicable edition and ordered dimensions.
Confirm the governing construction code, grade and class, design temperature, delivery heat treatment, test requirements and mill certificate.
Supply dimensions, lead time and inspection are confirmed against the order and mill offer.
A302 Grade B pressure vessel steel belongs to manganese-molybdenum and manganese-molybdenum-nickel alloy steel plates, A302 GrB steel are suitable for welding boilers and other pressure vessels. Materials A302GrB under the ASTM A302/A302M standard. According to its strength level, ASTM A302/A302M sheet is divided into four grades of A, B, C and D grades. ASTM A302GrB boiler and pressure vessel steel is widely used in petroleum, chemical industry, power station, boiler and other occupations to manufacture reactors, heat exchangers, separators, spherical tanks, oil and gas tanks, liquefied gas tanks, nuclear reactor pressure shells, boiler drums, liquefied petroleum gas cylinders, High-pressure water pipes of hydropower stations, turbine volute and other equipment and components.
The maximum thickness of A302 GrB pressure vessel steel plate is limited only by the ability of the chemical composition to meet the specified mechanical property requirements. A302GrB pressure vessel steel should be killed and meet the requirements of fine grain size. Sheets shall be tensile tested to determine tensile strength, yield strength and elongation. BBN Steel can provide cutting, welding, bending and other deep processing services to meet the needs of customers.
A302 Grade B pressure vessel steel Datasheet
Legacy technical note · verification required
Thickness: 0.5mm-150mm
Legacy technical note · verification required
Width : 1000mm/1250mm/1500mm/2200mm/2500mm or customized(Other widths are required for cutting)
Legacy technical note · verification required
Length: 1000mm/2400mm/6000mm or according to customer's request
Legacy technical note · verification required
Tolerance: Thickness :±0.5mm Width:±10mm Length :±10mm
Delivery condition: Hot rolled, controlled rolled, or normalized
Deep processing: After cutting large plate into the general sizes by drawing, milling and grinding, and make angles, polishing, and make special part
Package: tied up with steel strips and wrapped with water proof paper
A302 Grade B pressure vessel steel Chemical composition
Legacy technical table · verification required
Confirm every value against the applicable edition, thickness and material certificate.
| ASTM A302 Steel Plate Chemical Composition: | ||||||
|---|---|---|---|---|---|---|
| Elements | Type | Thickness | A302 Gr A | A302 Gr B | ||
| C | Heat analyse | ≤25mm | 0.20 | 0.20 | ||
| Product analyse | 25-50mm | 0.23 | 0.23 | |||
| >50mm | 0.25 | 0.25 | ||||
| Mn | Heat analyse | - | 0.95-0.13 | 1.15-1.50 | ||
| Product analyse | - | 0.87-1.41 | 1.07-1.62 | |||
| P | Heat analyse | - | 0.025 | 0.025 | ||
| S | Product analyse | - | 0.025 | 0.025 | ||
| Si | Heat analyse | - | 0.15-0.40 | 0.15-0.40 | ||
| Product analyse | - | 0.13-0.45 | 0.13-0.45 | |||
| Mo | Heat analyse | - | 0.45-0.60 | 0.45-0.60 | ||
| Product analyse | - | 0.41-0.64 | 0.41-0.64 | |||
A302 Grade B pressure vessel steel Mechanical Properties
Legacy technical table · verification required
Confirm every value against the applicable edition, thickness and material certificate.
| ASTM A302 | Yield Strength | Tensile Strength | Elongation |
|---|---|---|---|
| Steel Grade | Min Mpa | Mpa | Min % |
| A302 Grade B | 345 | 550-690 | 15 |
Equivalent Grade of A302 Grade B pressure vessel steel
Legacy technical table · verification required
Confirm every value against the applicable edition, thickness and material certificate.
| Grade | Standard | Country | Application |
|---|---|---|---|
| 14CrMo45 | EN | Europe | Mainly used in petroleum, chemical industry, power station, boiler and other industries. |
| 13CrMo44 | DIN | Germany | Mainly used in the pressure vessel industry, such as main pipes under high temperature conditions, superheating pipes, and elastic elements under high temperature conditions. |
Source and scope
- ASTM A302/A302M, ASTM steel standards catalogue · Catalogue entry for A302/A302M. ASTM identifies the specification for manganese-molybdenum and manganese-molybdenum-nickel alloy pressure vessel plate. Confirm the grade, product form and order edition.
Apply the cited scope to the matching designation and form. Confirm any remaining technical values with the applicable edition or material certificate.
.webp)
.webp)
.webp)
.webp)
.webp)
.webp)
.webp)
.webp)
.webp)
.webp)
.webp)

