• Catalogue illustration for A633 Gr.D Steel
  • Catalogue illustration for A633 Gr.D Steel
  • Catalogue illustration for A633 Gr.D Steel
  • Catalogue illustration for A633 Gr.D Steel
  • Catalogue illustration for A633 Gr.D Steel
  • Catalogue illustration for A633 Gr.D Steel
  • Catalogue illustration for A633 Gr.D Steel
  • Catalogue illustration for A633 Gr.D Steel
  • Catalogue illustration for A633 Gr.D Steel
  • Catalogue illustration for A633 Gr.D Steel

Choosing the Product Form for ASTM A633 Grade D Structural Steel

Pricing: Request an Order-Specific Quote

Reference: A633 Gr.D Steel. Check grade designation, product form and ordering requirements.

If the standard size steel materials can not meet your demands, We aslo supply A633 Gr.D Steel processing service. you can find one-stop solution for various customized steel processing requirements: Large vessels, structural parts, semi-products, components, manufacturing supporting ...

Processing: Specify drawing requirements with your enquiry.

E-mail: [email protected]

Whatsapp: +86 13569929107

A633 Gr.D Steel Description

A633 Gr.D Steel. Check the complete grade, product form, applicable edition and ordered dimensions.

Check the full grade and suffix, product form, delivery condition, nominal dimensions and any impact or dimensional acceptance requirement.

Supply dimensions, lead time and inspection are confirmed against the order and mill offer.

ASTM A633GrD normalized high-strength low-alloy structural steel under ASTM A633/A633M standards, and A633 GrD steel plate is delivered in hot-rolled condition. A633 GrD steel plate is a carbon low-alloy steel plate with high strength, high toughness and good welding. Properties and cold formability, as well as lower cold brittle transition temperatures, also require higher fracture toughness if applied to large welded components. A633GrD carbon and low alloy steel is suitable for welding, riveting or bolting structural parts, and the applicable environment is used in a low temperature environment greater than -45 degrees, because this environment requires that the notch resistance of the steel plate is better than that of the rolled steel plate with similar strength grades.

A633 Grade D carbon and low-alloy steel plate belongs to killed steel. Compared with boiling steel, killed steel is not allowed to have air bubbles and sand holes. ASTM A633GrD high strength has higher yield strength and toughness, and also has certain corrosion resistance and fatigue resistance. It is often used in hydraulic pressure. Machinery, construction machinery, mining machinery, or for structural welding. A633GrD steel plate rolling needs to provide the thickness, width and length of the steel plate, and the requirements for ultrasonic flaw detection and heat treatment of the steel plate need to be clarified. Pretreatment, ultrasonic flaw detection shall be carried out in accordance with ASME-A578 flaw detection standard for flaw detection of grades A, B, and C.

A633 Gr.D Grade D Carbon Steel and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.

Legacy technical note · verification required

Heat treated : 1467°C - 1645°C

A633 Gr.D Steel Datasheet

Legacy technical table · verification required

Confirm every value against the applicable edition, thickness and material certificate.

Legacy technical table
Steel Grade A633 Grade D Carbon steel
Standard ASTM
Width 500-2250mm
Thickness 0.15mm-300mm
Length 1000mm-12000mm or according to customer's special request
Surface Treatment According to customer requirements
Capacity 2000 tons /month
Special Use 1.Automobile, Bridges, Buildings.
2.Machinery, Pressure vessel industries.
3.Ship building, Engineering construction.
4.Mechanical manufacturing, Pavement slab, ect.

A633 Gr.D Steel Chemical composition

Legacy technical table · verification required

Confirm every value against the applicable edition, thickness and material certificate.

Legacy technical table
C
≤
Si
≤
Mn
≤
P
≤
S
≤
Cr Ni
0.2 0.15-0.5 0.7-1.6 0.035 0.04 0.25 0.25
Mo Al Cu Nb Ti V Ce
0.08   0.35        
N Co Pb B Other    
             

A633 Gr.D Steel Mechanical Properties

Legacy technical table · verification required

Confirm every value against the applicable edition, thickness and material certificate.

Legacy technical table
Yield
Rp0.2 (MPa)
Tensile
Rm (MPa)
Impact
KV/Ku (J)
Elongation
A (%)
Reduction in cross section on fracture
Z (%)
As-Heat-Treated Condition Brinell hardness (HBW)
681 (≥) 218 (≥) 44 32 12 Solution and Aging, Annealing, Ausaging, Q+T,etc 344

Equivalent Grade of A633 Gr.D Steel

Legacy technical table · verification required

Confirm every value against the applicable edition, thickness and material certificate.

Legacy technical table
Grade Standard Country Application
S355NL EN Europe Mainly used for rolling stock, hoisting machinery, mining machinery, large ships, bridges, pressure vessels and other large welded structures.
TSTE355 DIN Germany Mainly used in large ships, bridges, power station equipment, high pressure vessels.
E355FP NF France Mainly used as ine-grain structural steels, normalised rolled steels.
FEE355KTN UNI ITALY Mainly used in manufacturing shiphull, maritime oil extraction drilling platform, platform tube junction and other structural components.

Source and scope

  • ASTM A633/A633M-24, ASTM steel standards catalogue · Normalized HSLA plate entry. ASTM identifies A633/A633M as a normalized high-strength low-alloy structural plate specification. Use the grade and plate thickness to locate acceptance limits.

Apply the cited scope to the matching designation and form. Confirm any remaining technical values with the applicable edition or material certificate.

Send an Enquiry