Inconel 625 Nickel Alloy

Pricing: Request an Order-Specific Quote

Reference: Inconel 625 Nickel Alloy. Check grade designation, product form and ordering requirements.

Processing: Specify drawing requirements with your enquiry.

Available dimensions: Confirm by grade, form and quantity on quote.

E-mail: [email protected]

Whatsapp: +86 13569929107

Inconel 625 Nickel Alloy Steel Description

Inconel 625 Nickel Alloy. Check the complete grade, product form, applicable edition and ordered dimensions.

Confirm the exact designation, alloy family, form, heat treatment and any hardness, chemistry or machining requirement.

Supply dimensions, lead time and inspection are confirmed against the order and mill offer.

Legacy technical note · verification required

Inconel625 Alloy Steel is a solid-solution strengthened nickel-based deformation superalloy with nickel, chromium, molybdenum, and niobium as the main strengthening elements. Inconel625 nickel alloy steel has excellent corrosion resistance and oxidation resistance, and has good tensile properties and fatigue from low temperature to 980 °C. Performance, and resistant to stress corrosion in salt spray atmosphere. Therefore, Alloy 625 steel can be widely used in the manufacture of aero-engine parts, aerospace structural parts and chemical equipment. The alloy is used to manufacture parts such as engine casings, guide vanes, mounting edges and cylinders, and fuel manifolds; low-carbon alloy 625 is widely used in the chemical process industry, and its good corrosion resistance and high strength enable it to be used as a thinner structural parts. Alloy 625 steel can be used where it is exposed to seawater and subjected to high mechanical stress.

Legacy technical note · verification required

Inconel625 Nickel-based Alloy Steel can withstand increased stress, Inconel625 alloy steel is made of high chromium and nickel. The use of high chromium makes this special metal alloy variant highly resistant to corrosive conditions, and its high corrosion resistance also enables it to withstand sulfidation that occurs in high temperature environments. Inconel 625 has high temperature resistance up to 1093°C and excellent oxidation resistance. Inconel 625 maintains good corrosion resistance even under high temperature, harsh environment of seawater or flue gas desulfurization. Inconel 625 is suitable for high chloride aqueous solution and chloride corrosion environment. Inconel 625 standard product forms include sheet, bar, plate, round bar, flat bar, forged buttstock, hexagon, and wire, each in a variety of sizes.

Alloy 625 Nickel Steel contains about 58% nickel (Ni), 20-23% chromium (Cr), 8-10% molybdenum (Mo), 3.5% niobium (Nb), 1% iron (Fe), 0.5% Titanium (Ti) and other elements. Inconel625 contains about 30% copper and is a multifunctional ductile material. Due to its high strength, good plasticity, corrosion resistance and non-magnetic properties, Inconel625 has become an important material for electrical appliances, ships and equipment manufacturing, and is often made into wires. Belts and rods are used in electron tubes and electric vacuum instruments. The newer Inconel 625 has excellent oxidation and sulfidation resistance, and has improved resistance to other forms of high temperature corrosion.

Inconel 625 Nickel Alloy Steel Datasheet

Shape: Round, Coil, Square, Bar, Pipe, Sheet

Legacy technical note · verification required

Specification:
Wire: 0.01-10mm
Strip: 0.05*5.0-5.0*250mm
Bar: φ4-600mm, Length 2000-12000mm
Pipe: φ6-273mm, δ1-30mm, Length 1000-12000mm
Sheet: δ 0.8-36mm, Width 650-2000mm, Length 800-4500mm

Standard: GB,AISI,ASTM,DIN,EN,SUS,UNS etc

Inspection:  ISO,SGS,BV and so on.

Packaging:
1. cases packed in wooden cases
2. paper packaging
3. plastic packing
4. foam packaging
Packaging according to customer requirements or products

Inconel 625 Nickel Alloy Steel Chemical composition

Legacy technical table · verification required

Confirm every value against the applicable edition, thickness and material certificate.

Legacy technical table
Weight % C Mn P S Si Cr Ni Mo Nb+Ta Co Fe Al Ti
Min.           20.0 58.0 8.0 3.15        
Max. 0.10 0.50 0.015 0.015 0.50 23.0   10.0 4.15 1.00 5.00 0.40 0.40

Inconel 625 Nickel Alloy Steel Mechanical Properties

Legacy technical table · verification required

Confirm every value against the applicable edition, thickness and material certificate.

Legacy technical table
Dimension (mm) Yield strength
Rp0.2,
MPa
Tensile strengthRm,
MPa
Elongation
[%]
Hardness
[HB]
Impact Charpy-V, -60ºC
[J]
≤ 102 ≤ 414 ≥ 827 ≥ 30 ≤ 321 ≥ 68
≤ 254 ≤ 345 ≥ 758 ≥ 30 ≤ 321 ≥ 68
> 254 ≥ 345 ≥ 758 ≥ 30 ≤ 321 ≥ 42

Equivalent Grade of Inconel 625 Nickel Alloy Steel

Legacy technical table · verification required

Confirm every value against the applicable edition, thickness and material certificate.

Legacy technical table
STANDARD WERKSTOFF NR. (WNR) UNS JIS GOST BS AFNOR EN
Inconel 625 2.4856 N06625 NCF 625 ХН75МБТЮ NA 21 NC22DNB4MNiCr22Mo9Nb NiCr23Fe

Other names: Inconel 625, Alloy 625, Nickel 625, Chornin 625, Altemp 625, Nickelvac 625, Haynes 625, Nicrofer® 6020.

Source and scope

  • Special Metals, INCONEL technical bulletins · Grade-specific alloy bulletin directory. The producer provides separate nickel-alloy bulletins by designation. Check the exact UNS number, product form and heat treatment in the grade bulletin.

Apply the cited scope to the matching designation and form. Confirm any remaining technical values with the applicable edition or material certificate.

Send an Enquiry